Instruction for care

In distances between 500 and 1000 driven km (depending upon climatic conditions) one should clean and lubricate the drive set.
Handling characteristics as well as security are affected positively by it, life time of drive set will be extended substantially.

In order to obtain an optimal cleaning of the chain flanks, the lateral cleaning brushes with consideration the chain width are to be cut easily with scissor (brushes - putting in mechanism).

An optimal lubrication effect (long-term adhesion of the lubricant) is obtained only if the drive set were before thoroughly cleaned.
Further it is to be made certain absolutely that the drive set is during the lubrication procedure dry.

All kind of cleaner and lubricants available on the market can be used at the KETTENMAX. The compact cleaning and lubrication equipment ensure a pollution free, clean and fast chain care due to its closed building construction.

A cleaning of the KETTENMAX after each employment is not necessary, since cleaning agent is purposefully supplied and the contaminated means is again purposefully exhausted and caught (if the chain is clean, therefore also the brushes are clean).

In accordance with our experience the brush service life is with professional application (garage) of the KETTENMAX approx. 2 years.
With private employment the brush wear is accordingly smaller.

In principle the KETTENMAX is completely dismountable, all parts are easily exchangeable and available as set and individually.